| ... | ... | @@ -13,7 +13,7 @@ Description of displayed information, starting from top-left: |
|
|
|
- Ignore address checkbox and address
|
|
|
|
- The lower area of the display will show the latest received messages.
|
|
|
|
|
|
|
|
# Settings
|
|
|
|
## Settings
|
|
|
|
|
|
|
|
- **Frequency**: Sets the frequency to receive pager messages on. Can be adjusted with the [encoder thumb wheel](Hardware-overview), on-screen numpad, or loaded from frequencies saved on an SD card.
|
|
|
|
- **RF amplifier**: (0 or 1): Enables/disables the internal RF amplifier.
|
| ... | ... | @@ -24,7 +24,7 @@ Description of displayed information, starting from top-left: |
|
|
|
- **Log checkbox**: Enable/disable logging of received messages to an SD card. This log can be found on the SD card root directory, filename: `pocsag.txt`.
|
|
|
|
- **Ignore address checkbox**: Used to ignore messages sent to the address set.
|
|
|
|
|
|
|
|
# Message display
|
|
|
|
## Message display
|
|
|
|
|
|
|
|
Typical received message:
|
|
|
|
|
| ... | ... | @@ -41,7 +41,7 @@ Description (from top-left): |
|
|
|
- `F2` - **Function**: (0 to 3) Indicates the type or source of message sent (can be used to provide a category of sorts).
|
|
|
|
- `This is a test message` - **Message**: The message data displayed as ASCII.
|
|
|
|
|
|
|
|
## References
|
|
|
|
# References
|
|
|
|
|
|
|
|
The following resources provide more technical information about the POCSAG protocol:
|
|
|
|
|
| ... | ... | |
